Description of how "close" the bad sectors in the Dreambox to flash image in browser

[sly2803]

Description of how "close" the bad sectors in the Dreambox to flash image via internet browser
where we have no rs232 port on your computer, or DreamUp crashes all the time with bad sectors error which can not be repaired.

First DM800 off.
Second We press on the chassis power / power plug at the same time / procedure how to upload image ... /
Third STOP - DHCP - IP to display ...
4: Start>> Run>> telnet [ip Dreambox]>> Enter
5: We are in the BIOS of our Dreambox.

http://fotofotki.pl/images/15pkt8cm8czsyx3yqwj9.png

6: Set the picture as that is an option
"Flash Sector Recovery" to "enabled"

http://fotofotki.pl/images/31wiq4aci7mddhpbrn.png

7: Then go to the last tab "Exit" and save settings / valid without rebooting the tuner /

8: The next steps are the same as when loading the image, the browser will have the additional option enabled message "bad sector recovery enabled"


http://fotofotki.pl/images/wkc9vooj3ic4uqo8kzhf.png

9: Or, another message / messages when finding bad sectors in a flash they will be "closed" as we are notified.

http://fotofotki.pl/images/gujmre9n7awu8y4disc.png

10: After uploading the image we "reboot" and already we have a fully functional image.