serveur ubuntu 10.4 avec 4 smargo ???

[arsene]

J'ai un petit serveur ubuntu 10.4 avec 4 smargo sous cccam 2.11
et impossible de lire et de voir les carte en viaccess 3 et viaccess 4 ?
Une bonne âme pourrait m'aider SVP.
Merci d'avance.

[Ralleygolfg60]

I have a small ubuntu server 10.4 with 4 sub smargo cccam 2.11
and impossible to read and see the card viaccess viaccess 3 and 4?
A good soul could help me please.
Thank you in advance.

This is what I got when putting your text in Google translate
We would like our users to post in English you may also post in French but also English translation with it so everyone can read what you are posting.
And fter registering we appreciate it if you make a post in the Introduction section. This shows us that you have read the rules and have respect for what we are doing here.
It also serves as another purpose,... You cannot send PM`s until a post has been made therefore making an introduction post enables private messaging.

[fulgas]

Arsene,

Ajoute les lignes ci-dessous a ton dossier cccam.cfg

Ceci permettra a tous les 4 ports de reconnaitre les smargo presents et connectes.......

SERIAL READER : /dev/ttyUSB0 smartreader+
SERIAL READER : /dev/ttyUSB1 smartreader+
SERIAL READER : /dev/ttyUSB2 smartreader+
SERIAL READER : /dev/ttyUSB3 smartreader+


Je pense que ceci fera l'affaire


J'ai un petit serveur ubuntu 10.4 avec 4 smargo sous cccam 2.11
et impossible de lire et de voir les carte en viaccess 3 et viaccess 4 ?
Une bonne âme pourrait m'aider SVP.
Merci d'avance.

[afc007]

Arsene,

Ajoute les lignes ci-dessous a ton dossier cccam.cfg

Ceci permettra a tous les 4 ports de reconnaitre les smargo presents et connectes.......

SERIAL READER : /dev/ttyUSB0 smartreader+
SERIAL READER : /dev/ttyUSB1 smartreader+
SERIAL READER : /dev/ttyUSB2 smartreader+
SERIAL READER : /dev/ttyUSB3 smartreader+


Je pense que ceci fera l'affaire

:lol: as the original thread was 2010, I would hope he had cleared the problem by now or taken up another hobby :?

Anyhow thanks for posting a reply it clears the loose end up and allows me to close the thread ;)