User cain't connect to CSP, who can help me?

**SMARTX** · 13-02-2012

PROXY.XML
--------------------------------

Code:

   <cardserv-proxy ver="0.9.0">
   <ca-profiles>
   <default-des-key>01 ** ** ** ** ** 14</default-des-key>
   <max-threads>7000</max-threads>
   <session-timeout>60</session-timeout>
   <extended-newcamd listen-port="11112" debug="false">
   <des-key>01 02 03 04 05 06 07 08 09 10 11 12 13 14</des-key>
   <exclude-profiles>profiel1</exclude-profiles>
   </extended-newcamd>  
   <profile name="skyde09c4" ca-id="09C4" network-id="0085" provider-idents="00 00 00" enabled="true" debug="false">
   <newcamd listen-port="11113"><no-validation>true</no-validation></newcamd><newcamd listen-port="11123"/>
   <services-file>etc/services</services-file>
   </profile>
   </ca-profiles>
   <user-manager class="com.bowman.cardserv.SimpleUserManager">
   <auth-config>
   <user name="*****" password="*****" max-connections="3" admin="true"/>
   </auth-config>
   </user-manager>
  
   <logging log-ecm="true" log-emm="false" log-zapping="false" hide-ip-addresses="false">
   <log-file rotate-count="3" rotate-max-size="1024">log/cardserv.log</log-file>
   <log-level>INFO</log-level>
   <log-dateformat>yyMMdd HH:mm:ss.SSS</log-dateformat>
   <silent>true</silent>
   <debug>false</debug>
   </logging>
 
   <rmi>
   <display-name>NEW-CSP</display-name>
   <status-web>
   <listen-port>****</listen-port>
   <ssl enabled="false"> 
   <keystore password="****">etc/csp_keystore</keystore>
   </ssl>

   <war-file>lib/cs-status.war</war-file>
   <super-users>****</super-users>
   </status-web>
   </rmi>    
   <user-manager class="com.bowman.cardserv.XmlUserManager" allow-on-failure="true" log-failures="true">
   <auth-config>
   <open-access enabled="false"/>
   <user-file-url>file:///usr/local/bin/csp/config/users.xml</user-file-url>
   <update-interval>3</update-interval>
   </auth-config>
   </user-manager>
 
   <connection-manager>
   <reconnect-interval>60</reconnect-interval>
   <max-cw-wait>4500 ms</max-cw-wait>
   <default-keepalive-interval>55</default-keepalive-interval>
   <default-client-id>43 43</default-client-id>
   <default-min-delay>100</default-min-delay>
   <timeout-disconnect-threshold>10</timeout-disconnect-threshold>
   <cannot-decode-wait>1</cannot-decode-wait>
   <log-sid-mismatch>false</log-sid-mismatch>
   <service-map>

   <mapper>         
   <auto-reset-threshold>20</auto-reset-threshold> 
   </mapper>
   <mapper profile="****">
   <reset-services></reset-services>
   <block-services></block-services>
   </mapper>
   <mapper profile="****">
   <reset-services></reset-services>
   <block-services></block-services>
   </mapper>
   <mapper profile="****">
   <reset-services></reset-services>
   <block-services></block-services>
   </mapper>
   </service-map>
   <external-connector-config class="com.bowman.cardserv.cws.CwsConnectorManager" enable="true">
   <connector-file-url>file:///usr/local/bin/csp/config/connectors.xml</connector-file-url>
   <update-interval>2</update-interval>
   </external-connector-config>    
   </connection-manager>
   <proxy-plugins>
   <plugin class="***" enabled="false">
   <plugin-config>
   <log-dir>log/traffic</log-dir>
   <log-level>ALL</log-level>
   <ip-filter>*</ip-filter>
   </plugin-config>
   </plugin>
   <plugin class="*****" enabled="true" jar-file="****.jar">
   <plugin-config>
   <bad-dcw>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00</bad-dcw>
   <bad-dcw>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01</bad-dcw>
   <bad-dcw>00 00 00 00 00 00 3C 3C 00 00 00 00 00 00 3C 3C</bad-dcw>
   <bad-dcw>01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16</bad-dcw>
   <detect-links>true</detect-links>
   <verify-replies>false</verify-replies>
   <force-continuity>false</force-continuity>
   </plugin-config>
   </plugin>  
   <plugin class="****" enabled="true" jar-file="****.jar"/>
   <plugin class="****" enabled="true" jar-file="****.jar"/>
   </proxy-plugins>
   <cache-handler class="****">
           <cache-config>
               <cw-max-age>19</cw-max-age>
   <local-host>****</local-host>
               <max-cache-wait>40%</max-cache-wait>
               <local-port>****</local-port>
   <sync-period>0</sync-period>
   <hide-names>true</hide-names>
   <debug>true</debug>
           </cache-config>
   </cache-handler>
   </cardserv-proxy>

USERS.XML

Code:

<xml-user-manager ver="1.0">
<user name="test" password="wscojwecoijc" display-name="[1] test1" email-address="******@gmail.com" max-connections="1" enabled="true" start-date="13-02-2012" expire-date="29-02-2012" /></xml-user-manager>

USER N LINE:

Code:

N: dns port test wscojwecoijc 01 02 03 04 05 06 07 08 09 10 11 12 13 14

(Connector is working fine!)

**whoswhonow** · 15-02-2012

Have you added your users username and password like below yours is blank in your xml?

<user-manager class="com.bowman.cardserv.SimpleUserManager">
<auth-config>
<user name="admin" password="11111111" max-connections="3" admin="true" />
<user name="user1" password="secret1" profiles="myprofile" />
<user name="user2" password="red" /> #home user#

**SMARTX** · 15-02-2012

Originally Posted by whoswhonow

Have you added your users username and password like below yours is blank in your xml?

<user-manager class="com.bowman.cardserv.SimpleUserManager">
<auth-config>
<user name="admin" password="11111111" max-connections="3" admin="true" />
<user name="user1" password="secret1" profiles="myprofile" />
<user name="user2" password="red" /> #home user#

Yes i have... Maybe could/would you help me on msn?

**whoswhonow** · 16-02-2012

Hi

I can help you.but on here will be best..

pm me your proxy xml take out your hostnames ect and you can x out passwords but leave the ports as they are..

the proxy xml you attached to post 1 does not have any users set under user manager...

your users set up is wrong you need to add the users in your main proxy xml..

the nline you are trying to give out is fine..

pm your full xml and il have a look,what providor are you watching??

**SMARTX** · 16-02-2012

Ik have solved the problem, this is the right config:

Code:

<cardserv-proxy ver="0.9.0">


  <ca-profiles>

    <default-des-key>01 02 03 04 05 06 07 08 09 10 11 12 13 14</default-des-key>

    <extended-newcamd listen-port="*******" debug="true"/>

			  

    <profile name="*****" ca-id="****" network-id="***" provider-idents="****" enabled="true" debug="true">

			<newcamd listen-port="*****">

			</newcamd>

			<services-file format="cccam">etc/CCcam.channelinfo</services-file>

      <max-cw-wait>8500 ms</max-cw-wait>

    </profile>

	

	<profile name="skyde09c4" ca-id="09c4" network-id="0085" provider-idents="00 00 00" enabled="true" debug="true">

			<newcamd listen-port="****">

			</newcamd>

			<max-cw-wait>8500 ms</max-cw-wait>

			<services-file format="cccam">etc/CCcam.channelinfo</services-file>

    </profile>

     </ca-profiles>


  <logging log-ecm="true" log-emm="true" log-zapping="false" hide-ip-addresses="false">

    <log-file rotate-count="3" rotate-max-size="1024">log/cardserv.log</log-file>

    <log-level>INFO</log-level>

    <silent>true</silent>

    <debug>false</debug>

  </logging>

  

  <rmi>

    <display-name>CSP</display-name>

    <status-web>

      <listen-port>****</listen-port>

      <ssl enabled="false"> 

        <keystore password="secret">etc/csp_keystore</keystore>

      </ssl>

      <war-file>lib/cs-status.war</war-file>

      <super-users>admin</super-users>

    </status-web>

  </rmi> 

	<user-manager class="com.bowman.cardserv.XmlUserManager" log-failures="true">

		<auth-config>

			<update-interval>1</update-interval>

			<user-source name="users">

				<user-file-url>file:///usr/local/bin/csp/config/users.xml</user-file-url>

			</user-source>

		</auth-config>

	</user-manager>


  <connection-manager>

    <reconnect-interval>30</reconnect-interval>

    <default-des-key>01 02 03 04 05 06 07 08 09 10 11 12 13 14</default-des-key>

    <default-keepalive-interval>55</default-keepalive-interval>


    <service-map>

      <mapper>         

        <auto-reset-threshold>20</auto-reset-threshold> 

      </mapper>

      <mapper profile="">

        <reset-services></reset-services>

        <block-services></block-services>

      </mapper>

    </service-map>

	

	<external-connector-config enabled="true">

			<connector-file-url>file:///usr/local/bin/csp/config/connectors.xml</connector-file-url>

			<update-interval>1</update-interval>

	</external-connector-config>


    

  </connection-manager>


  <proxy-plugins>

    <plugin class="com.bowman.cardserv.LoggingPlugin" enabled="false">

      <plugin-config>

        <log-dir>log/traffic</log-dir>

        <log-level>ALL</log-level>

        <ip-filter>*</ip-filter>

      </plugin-config>

    </plugin>

    <plugin class="com.bowman.cardserv.DcwFilterPlugin" enabled="true" jar-file="dcwfilterplugin.jar"/>

    <plugin class="com.bowman.cardserv.ProviderIdentPlugin" enabled="true" jar-file="provideridentplugin.jar"/>

    <plugin class="com.bowman.cardserv.IrdetoPlugin" enabled="true" jar-file="irdetoplugin.jar"/>

  </proxy-plugins>

 

  <cache-handler class="com.bowman.cardserv.ClusteredCache">

		<cache-config>

			<cw-max-age>19</cw-max-age>

                     <local-host>look2sf01.no-ip.info</local-host>

			<max-cache-wait>40%</max-cache-wait>

			<local-port>****</local-port>

			<sync-period>0</sync-period>

                     <hide-names>true</hide-names>

                     <debug>true</debug>

		</cache-config>

  </cache-handler>


<mapper profile="skyde09c4">

<reset-services></reset-services>

<block-services></block-services>

</mapper>


</cardserv-proxy>

So only 1 user manager in the proxy file, that's the problem. I have 1 user manager file in the config now it's working fine!

Thanks a lot!

**whoswhonow** · 18-02-2012

very good to hear glad you got it sorted....

Thread: User cain't connect to CSP, who can help me?

Thread Tools

Search Thread

Display

User cain't connect to CSP, who can help me?

solved!

Similar Threads

DM500S refuse connect to dcc

cccam not even attempting to connect to server

How to connect oscam with cccam

How to Connect Dreambox to PC

Tags for this Thread

Posting Permissions