Follow Us On Follow us on Facebook Follow us on Twitter Watch us on YouTube

Register




Results 1 to 1 of 1
  1. #1
    Super Moderator Tube10000's Avatar
    Join Date
    Jan 2011
    Location
    Oxford
    Posts
    6,232
    Post Thanks / Like
    Sat Box
    VU-Solo2/ET 9200/ ET9000/ET6000

    RedSn0w 0.9.15b3

    RedSn0w 0.9.15b3

    How To: Jailbreak iOS 6.1 Beta 2 Build 10B5105c On iPhone 4, iPhone 3GS, iPod Touch 4G With RedSn0w 0.9.15b3 [Windows]

    Previously we shared with you instructions on how to Jailbreak the newly released iOS 6 beta 2 build 10B5105c firmware. The process is exactly the same if you are on a Windows computer, but take heed this is only for developers. As such, in this tutorial you will learn how to Jailbreak the iOS 6 beta 2 firmware on your A4 iOS device with the Windows version of RedSn0w 0.9.15b3.

    Supported Devices Include

    • iPhone 4 CDMA
    • iPhone 4 GSM
    • iPhone 3GS (Untethered Jailbreak if old-bootrom)
    • iPod Touch 4G



    RedSn0w 0.9.15b3 iOS 6.1 Beta 2 Jailbreak [Windows]

    Step 1: The first thing you will need to do is download RedSn0w 0.9.15b3 for the Windows operating system using the download mirror below or through the iJailbreak Downloads Section. You will also need to download the iOS 6 firmware for the device you are Jailbreaking, which can be found in the downloads section.

    Download RedSn0w 0.9.15b3 (Windows)

    Step 2: Once you have downloaded RedSn0w 0.9.15b3 you will need to extract it by right clicking on the zip file and then clicking the extract to folder option.


    When RedSn0w has been extracted find the redsn0w.exe file, right click on it and click the Run as administrator option (if applicable).


    Step 3: With RedSn0w up and running you will need to simply click the Extras button.

    Click this bar to view the original image of 466x602px.

    Step 4: Next click the Select IPSW button and select the applicable iOS 6 firmware file for your device. After RedSn0w successfully recognizes the firmware you will need to click the Back button, followed by the Jailbreak button.

    Click this bar to view the original image of 466x602px.

    Step 5: Once you click the Jailbreak button you will be presented a screen with preparation instructions for entering DFU mode. Read through these instructions, power off your iPhone or iPod Touch if you haven’t already, and then click the Next button.

    Click this bar to view the original image of 466x602px.

    Once you click the Next button you will need to execute the steps shown on-screen, which are:

    • Hold down Power (corner) button for 5 seconds.
    • Without releasing the Power button, also hold down the Home (bottom center) button along with the Power button for 10 seconds.
    • Without releasing the home button, stop holding down the power button for up to 15 seconds



    Click this bar to view the original image of 591x749px.

    Step 6: After you have entered DFU mode, RedSn0w will begin processing the iOS 6 firmware.

    Click this bar to view the original image of 466x602px.

    When the firmware has been processed you will come to a screen with a few options for your Jailbreak. Ensure that the “Install Cydia” option is checked, and then click the Next button to begin the actual Jailbreaking process.

    Click this bar to view the original image of 466x602px.

    Step 7: RedSn0w will now begin jailbreaking your iPhone or iPod Touch. DO NOT interrupt or use the computer during this time. When the iOS device is finished being jailbroken it will reboot into a non-Jailbroken state (or in some cases will not make it past the Apple logo). This is because you have a tethered Jailbreak and will need to boot it using RedSn0w.

    Step 8: Launch RedSn0w again if you exited out of it, click the Extras button, click the Select IPSW button, browse for your device’s iOS 6 firmware again and then click the Just Boot button. You will now need to put the iPhone or iPod Touch into DFU mode again. Once your iOS device is in DFU mode it will boot into a Jailbroken state.

    Note: Remember that you will need to repeat Step 8 every time your iPhone or iPod Touch loses power.

    This Jailbreak is only for developers because there is not reason why someone would want to update to the iOS 6.1 beta 2 firmware in the first place. The changes in the iOS 6.1 firmware are minute, and it is not worth risking the chance of missing the untethered iOS 6 Jailbreak. If you have any further questions or thoughts please drop us a line in the comments.

    Download redsn0w_win_0.9.15b3.zi

    Download redsn0w_mac_0.9.15b3.zip
    Please note: Viewing Pay TV without a valid subscription is illegal!
    If someone helps you, dont forget to use the THANKS button
    XTrend ET9200, Xtrend ET9000 und XTrend ET6000

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many


     

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •